1. Axle Parts Transmission Drivetrain For Sale
  2. sku: 13248394360462502
  3. LUJUNTEC LJT840653S01

LUJUNTEC LJT840653S01 Front Left Right Cv Axle 2X 2.5L

fits model: Milan, Fusion. make: Mercury, Ford. year: 2010–2012.

Ljt840653s01 Lujuntec 2x Front Left Right For Mercury Milan 2010 2011 Ford Fusion 2010-12 2.5l Cv Axle

( Brand: Lujuntec ), ( Manufacturer Part Number: LJT840653S01 ), ( Placement On Vehicle: Front Left Right ), ( Fitment Type: Direct Replacement ), ( Part Type: Cv Axle Assembly, Cv Axle Shaft ), ( Interchange Numbers: Ae5z3a427b, Ae5z3a427e ), ( Surface Finish: Heat Treatment ), ( Non-domestic Product: No ), ( Bundle Listing: Yes ), ( Manufacturer Warranty: 1 Year ), ( Material: Steel ), ( Oe Spec Or Performance/custom: Performance/custom ), ( Input Shaft Connection Style: Splined ), ( Input Shaft Spline Count: Left, 2 ), ( Output Shaft Spline Count: 28 ), ( Transmission Type: Automatic ), ( Axle Nut Locking Type: Left ), ( Type: Axle Housing ), ( Notes: Verify This Part Fits Your Vehicle Using The Compatibility Chart )

Review LUJUNTEC 2x Front Left Right Mercury Ford 2.5l Cv Axle fits MILAN FUSION 2010–2012

Introducing the Lujetech LJT840653S01 2x Front Left and Right CV Axles, specifically designed for select models of the Mercury Milan from the years 2010 and 2011, as well as the Ford Fusion from the same time frame with a 2.5L engine. This CV axle assembly is a crucial component of your vehicle's drivetrain system, responsible for transmitting power from the transmission to the wheels.

The Lujetech CV axles are desired by many automotive enthusiasts and professionals due to their superior quality and durability. They are precision-engineered and crafted from premium materials to ensure robust performance even under heavy loads. When you purchase these CV axles, you can expect a perfect fit for your Mercury Milan or Ford Fusion, as they are designed according to the exact OEM specifications.

The shafts of the CV axles are reinforced with strong steel, ensuring that they can effectively transfer engine power to the wheels, even during demanding driving scenarios. The rubber CV boot is included to protect the CV joint from contaminants like water, dirt, or grime. This adds an extra layer of protection, ensuring a long-lasting, problem-free driving experience.

Installing the Lujetech LJT840653S01 2x Front Left and Right CV Axles is made easy with the step-by-step installation guide that comes with the product. If you prefer a professional installation, you can also rely on your trusted mechanic to complete the job. In the unlikely event of a manufacturing issue, Lujetech offers a comprehensive warranty to cover any defects in materials or workmanship, ensuring your peace of mind and complete satisfaction with your purchase.

In summary, these Lujetech LJT840653S01 2x Front Left and Right CV Axles are the perfect upgrade for your Mercury Milan or Ford Fusion. Their superior quality, precise fit, and durability not only guarantee a reliable and efficient driving experience, but also minimize the need for frequent replacements. Trust Lujetech to provide you with superior aftermarket automotive parts, backed by a top-tier warranty.

Pros and Cons of Buying Lujuntec LJT840653S01 CV Axle Assemblies for Mercury Milan, Ford Fusion 2010-2011 2.5L

1. Pros:

a. Cost-Effective: Lujuntec LJT840653S01 CV Axle Assemblies are often more affordable compared to OEM (Original Equipment Manufacturer) alternatives, allowing you to save money on the repair.

b. Good Fit: These axles are specifically designed for Mercury Milan and Ford Fusion 2010-2011 models with 2.5L engines, ensuring a precise fitment.

c. OEM-Like Quality: Lujuntec is known for manufacturing high-quality parts, which may offer similar performance to OEM parts.

d. Easy Installation: Replacing the CV axle assembly is a relatively straightforward repair, and these aftermarket assemblies are engineered for quick and hassle-free installation.

2. Cons:

a. Durability Concerns: Some users have reported issues with the longevity of the Lujuntec CV Axle Assemblies and the need for premature replacement.

b. Questionable Warranty: The warranty provided by Lujuntec may be less extensive than that offered by OEM manufacturers, which could leave consumers without coverage for potential future problems.

c. Performance Differences: Although similar in some aspects, there might be performance differences between aftermarket and OEM axles. Some drivers may notice subtle differences in steering feel or road vibration.

Conclusion:

When considering the Lujuntec LJT840653S01 CV Axle Assemblies for your Mercury Milan or Ford Fusion 2010-2011 2.5L, it's essential to weigh the pros and cons. These aftermarket axles offer cost savings, easy installation, and precise fitment.However, potential drawbacks include durability concerns, a less comprehensive warranty compared to OEM, and potential performance differences. Ultimately, the decision to purchase these aftermarket axles depends on your preferences, budget, and priority for OEM-equivalent performance and longevity. If you're looking for a cost-effective solution that gets the job done, the Lujuntec LJT840653S01 CV Axle Assemblies may be a suitable choice. However, if you prefer a more robust and long-lasting solution, OEM alternatives might be worth considering.

Details:

Pry Bar or CV Axle Puller. Reattach the tie rod to steering knuckle and rejoin hub with strut. Just as you removed the old CV axle, insert new one into same spot in transmission housing. Refill the transmission fluid recommended for your vehicle.

Remove the CV axle from hub by hitting joint with a drift chisel and hammer. The peg will slide in until the axle is flush against housing. Our return process is simple and fast. Use a torque wrench to fasten the bolts recommended specifications.

Remove the brake caliper. Once these bolts are removed, the hub should only be connected by axle through hole. There are some vehicle repairs that should be done by qualified mechanics to prevent any further issues. Do not remove the lug nuts completely.

Any damage to the sensor ring can cause Anti Lock Braking ABS system get damaged and malfunction. About Shipping 2x Front Left right For Mercury Milan 2010 2011 Ford Fusion 2010 12 2.5L CV Axle How To Replace A Shaft. Its advised to replace your transmission fluid and seal if necessary.

You can also refer to the user manual for specific torque values. Detach the brake fluid hose and set it aside safely to keep secure. Use a pry bar to remove the CV axle from engine side. Remove wheels by loosening the lug nuts using a wrench.

Remove the hubcap to access axle nut and loosen it using a breaker bar. Unbolt the castle nut on outer tie rod and remove it from steering knuckle using a end puller tool. Hammer or Mallet. Make sure the brake line is not damaged in process and working fine.

After the wheel is attached, you can lower car by removing jack and stands. Place a jack under the car to lift it off ground and install jack stand under vehicle. Take a lug wrench and loosen the wheels nuts. Before replacing the old CV axle shaft, check whether new shaft has same specifications or not.

It should have the same compressed length , inner and outer stub length spline count for proper fitment, seal diameters. Tools required: Drain Pan. Reinsert the other end of axle shaft through hub assembly in same spot where you removed old. A CV boot failure is a bad news for any joint because, if the fails, will lose its lubrication and eventually fail.

If your CV axles have a sensor ring around the outer joint, handle shaft with care during installation. Remove the axle nut and brake assembly using a wrench socket. Fasten the axle nut to specifications mentioned in manual using a torque wrench and replace hub cap. Reinstall the brake rotors and calipers.

Unbolt the hub from strut by loosening bolts that held them together. Before removing the CV shaft completely, place a drain pan underneath engine where other end of is connected to transmission. While installing the CV shaft, ensure boots are secured properly and show no signs of visible damage like cracks splits. Step 2: Installing The New CV Axle.

Step 1: Removing The Old CV Axle. Check the transmission fluid for discoloration while replacing CV axle shaft. If the axle doesn come loose, try twisting it back and forcing to break seal. Tips While Replacing A CV Axle.

You can also use a screwdriver to pop the CV joint out and disconnect shaft from hub assembly. Replace the CV shaft seal if you see any transmission fluid leaking. Tighten the lug nuts and remove wheel chocks to take vehicle for a test drive. Screwdrivers.

Park your car on a leveled surface, secure the vehicles wheel using chocks, and engage parking brakes. Never use a power tool to torque the spindle nut because you can damage and outer CV joint. New List Item. Use a torque wrench to tighten the nuts and bolts values specified by manufacturer.

You can also refer to the owners manual for right placement of jack. Its normal for some transmission fluid to leak out as you remove the axle from CV joint. Reattach the sway bar if removed earlier, and fasten lug nuts to reattach wheel.

specifications axlpar:

  • for models: Milan, Fusion
  • for makes: Mercury, Ford
  • for years: 2010-2012
  • brand: Lujuntec
  • mpn: Ljt840653s01
  • placement on vehicle: Front Left Right
  • fitment type: Direct Replacement
  • part type: Cv Axle Assembly, Cv Axle Shaft
  • interchange numbers: Ae5z3a427b, Ae5z3a427e
  • surface finish: Heat Treatment
  • non-domestic product: No
  • bundle listing: Yes
  • manufacturer warranty: 1 Year
  • material: Steel
  • oe spec or performance/custom: Performance/custom
  • input shaft connection style: Splined
  • input shaft spline count: Left, 2
  • output shaft spline count: 28
  • transmission type: Automatic
  • axle nut locking type: Left
  • type: Axle Housing
  • notes: Verify This Part Fits Your Vehicle Using The Compatibility Chart

returns axlpar:

  • policy: Returns Accepted
  • paid by: Seller
  • time: 30 Days

offer axlpar:

  • best offers: True
  • availability: In Stock
  • started: February 3, 2025
  • sold: 0
  • options: Ship-to-home
  • quantity: 10

seller axlpar:

  • # reviews: 15771
  • city: Ontario, California
  • rating: 99.1%

shipping axlpar:

  • cost: $0.00
  • service: Standard
  • type: Fixed
  • class: Standard
  • transit: 3-8 Days

payments axlpar:

  • wallet: Paypal
  • credit card: Discover
  • other

general axlpar:

  • condition: New
  • Car Truck Parts Accessories > Transmission Drivetrain > Axle Housings Parts
for models: milan, fusion, for makes: mercury, ford, for years: 2010-2012, placement on vehicle: front left right, fitment type: direct replacement, part type: cv axle assembly, cv axle shaft, interchange numbers: ae5z3a427b, ae5z3a427e, surface finish: heat treatment, non-domestic product: no, bundle listing: yes, manufacturer warranty: 1 year, oe spec or performance/custom: performance/custom, input shaft connection style: splined, input shaft spline count: left, 2, output shaft spline count: 28, transmission type: automatic, axle nut locking type: left, type: axle housing, notes: verify this part fits your vehicle using the compatibility chart,
category: auto parts > car truck parts accessories > transmission drivetrain > axle housings parts, material: steel, sku: 13248394360462502,
Lujuntec LJT840653S01 Is Similar To:

Copyright © axlpar.com