1. Axle Parts Transmission Drivetrain For Sale
  2. sku: 22705280682858751
  3. EVERPARTSTORECS FP11T2

EVERPARTSTORECS FP11T2 Front Cv Axle 3.0L 2.0L

fits model: S4, S5, A4, A5. make: Audi. year: 2010–2011.

Fp11t2 Everpartstorecs Front Cv Axle Assembly For Audi S4 S5 3.0l 2010-2012 A4 A5 2.0l 2010-2011

( Brand: Everpartstorecs ), ( Manufacturer Part Number: FP11T2 ), ( Manufacturer Warranty: 1 Year ), ( Placement On Vehicle: Front, Left, Right ), ( Fitment Type: Direct Replacement ), ( Type: Cv Axle ), ( Performance Part: No )

Review EVERPARTSTORECS Front Cv Axle Assembly Audi 3.0l 2012 2.0l fits S4 S5 A4 A5 2010–2011

EverStart Replacement Front CV Axle Assembly for Audi S4, S5, A4, and A5 (3.0L 2010-2012 & 2.0L 2010-2011)

Description:

The EverStart Front CV Axle Assembly is an essential component for maintaining the optimal performance of your Audi S4, S5, A4, or A5 vehicle. Designed specifically for Audi models equipped with 3.0L engines from the years 2010 to 2012, and 2.0L engines from the years 2010 to 2011, this top-tier replacement part ensures a perfect fit and reliable operation.

Constructed using premium materials, this EverStart Front CV Axle Assembly is engineered to provide superior strength and durability. The CV joints are designed with a high-quality, double-lip seal that effectively prevents grease leakage and contamination, ensuring a smooth and efficient driving experience. The axle shafts are manufactured from strong, tempered steel, able to withstand the demanding conditions of everyday driving.

Installation is made easy with the inclusion of all necessary hardware and clear installation instructions. The EverStart Front CV Axle Assembly is backed by a comprehensive warranty, offering peace of mind and protection against manufacturing defects. By upgrading your vehicle with this replacement part, you can restore the performance and confidence you've come to expect from your Audi.

Key Features:

- Designed for Audi S4, S5, A4, and A5 models with 3.0L engines (2010-2012) and 2.0L engines (2010-2011)

- High-quality construction using premium materials

- Double-lip seal on CV joints to prevent grease leakage and contamination

- Strong, tempered steel axle shafts for superior strength and durability

- Comprehensive warranty for peace of mind and protection against manufacturing defects

- Complete installation hardware included

With the EverStart Front CV Axle Assembly, you can trust that your Audi is in good hands. This replacement part not only ensures reliable operation but also enhances the overall driving experience of your vehicle. Upgrade now and enjoy the confidence and performance you deserve.

The EverStart FRP11T2 front CV axle is a potential replacement option for various Audi models, including the S4, S5, A4, and A5 with 3.0L and 2.0L engines manufactured between 2010 and 2012. Here are some pros and cons of purchasing this part.

Pros:

1. OEM-equivalent: The EverStart FRP11T2 front CV axle is an aftermarket alternative that closely resembles the original equipment manufactured by Audi. This means the part should fit and function similarly to the OEM axle.

2. Cost-effective: Compared to purchasing a new OEM part from Audi, the EverStart FRP11T2 front CV axle is generally more affordable, making it an attractive option for budget-conscious consumers.

3. Availability: This aftermarket part is widely available from various automotive retailers and online marketplaces, making it easier to find and purchase compared to some OEM parts.

Cons:

1. Quality concerns: While the EverStart FRP11T2 front CV axle is designed to be a close fit and function similarly to the OEM part, there may be some concerns regarding its overall quality. Some customers have reported issues with the durability and reliability of the aftermarket part.

2. Installation: Depending on your mechanical skills and experience, installing the EverStart FRP11T2 front CV axle may require professional assistance from a certified mechanic. This could add additional costs to the repair.

3. Warranty: Unlike OEM parts, aftermarket parts like the EverStart FRP11T2 front CV axle may not come with the same level of warranty coverage. This means that if the part fails prematurely, you may not be covered for repairs or replacement.

Conclusion:

The EverStart FRP11T2 front CV axle is an affordable alternative to purchasing an OEM part for your Audi S4, S5, A4, or A5. However, it's essential to consider the potential trade-offs, such as potential quality concerns and the need for professional installation. Ultimately, the decision to purchase this aftermarket part depends on your budget, mechanical skills, and personal preference. If you're comfortable with the potential risks and willing to save some money, the EverStart FRP11T2 front CV axle could be a viable option. However, if you prioritize peace of mind and the highest level of quality, it may be worth considering purchasing an OEM part instead.

Recommendation:

For those who are comfortable with the potential risks and willing to save some money, the EverStart FRP11T2 front CV axle could be a suitable option. However, if you prefer a more reliable and worry-free solution, consider purchasing an OEM part from a certified Audi dealership or authorized repair facility. This may cost more upfront, but it could provide you with greater peace of mind and a higher level of warranty coverage. Ultimately, the decision is yours based on your priorities, budget, and mechanical skills.

Details:

Safely lift the vehicle and support it with jack stands. Compare the new CV axle with old one to ensure they are identical. You might need a pry bar to gently persuade it. Tie rod end from the steering knuckle.

A new transmission seal is often recommended at this time. Be cautious not to damage the transmission seal or housing. Outer End: Slide the outer CV joint splines through wheel hub. It is designed primarily to accommodate the in-and-out plunging motion as suspension moves up and down.

The CV axle is located at each driven wheel. Test drive the vehicle carefully, listening for any unusual noises, and check proper operation. The boots are crucial because they keep contaminants dirt, water out and grease in. No delivery to remote areas.

Before lowering the vehicle, install new axle nut always use a if specified by manufacturer. Brake caliper and rotor hang the safely with a wire, do not let it dangle by brake hose. Durability: CV axles are engineered to withstand high levels of torque, shock loads, and extreme operating angles. ABS ring, cir clips from the old axle to new one if they are not pre-installed.

Reconnect the steering knuckle to ball joint and control arm. A torn CV boot is a common failure point that leads to joint wear. Reinstall the brake rotor and caliper. Reconnect the tie rod end.

They are packed with special high-temperature grease to lubricate the joint. Outer CV Joint: This joint connects to the wheel hub/knuckle. It is typically a Resp Ball-type joint, famous for its ability to operate at high angles. The outer end splines into the wheel hub or steering knuckle and is secured by a large nut.

Once separated, you can pull the entire steering knuckle assembly outward. Lower ball joint or control arm from the steering knuckle. Step 1:Safety Preparation. Check the transmission fluid level and top it up if necessary, as some is always lost during removal.

Important: Do not over-angle the new axle, as this can damage CV boots. Lower the vehicle completely and perform a final torque on lug nuts in star pattern. This is critical for proper bearing reload. Remove the Axle Nut: Completely remove pre-loosened axle nut.

Installation steps for CV A xle. Inner End: Gently push the inner CV joints splines into transmission until its and is fully seated. Outer End: Pull the steering knuckle back to slide outer CV joint splines out of wheel hub. Constant Velocity CV Joints: Each axle has two types of CV joints.

CV Boots: These are flexible rubber or thermoplastic boots that enclose each joint. Step 2:Disconnection. The inner end of the CV axle splines into transmissions differential. Axle Shaft: A sturdy steel shaft that connects the inner and outer CV joints.

It is designed to handle the extreme angles required for steering wheels left and right. In AWD vehicles, all four wheels have CV axles connecting the front/rear differentials. Carefully transfer any necessary components Loosen the large axle nut hub nut on wheel while vehicle is still ground.

Install the wheel but do not fully tighten lug nuts yet. CV Axle Installation Location. Step 3: Separate the Knuckle. This creates enough space to pop the CV axle out of wheel hub and transmission.

Place a drain pan underneath, as some transmission fluid may leak out. Remove the wheel. Inner End: Carefully pry the inner CV joint out of transmission using a bar. Front CV Axle Assembly For Audi S4 S5 3.0L 2010 2012 A4 A5 2.0L 2010 2011 Fitment.

Inner CV Joint: This joint connects to the transmission or differential. Disconnect Components: any components that obstruct the axles removal. Use a ball joint separator tool to safely free the steering knuckle from control arm or strut. Never work under a vehicle supported only by jack.

Park the vehicle on a level, solid surface and engage parking brake. This typically includes. CV Axle Features.

specifications axlpar:

  • for models: S4, S5, A4, A5
  • for makes: Audi
  • for years: 2010-2011
  • brand: Everpartstorecs
  • mpn: Fp11t2
  • manufacturer warranty: 1 Year
  • placement on vehicle: Front, Left, Right
  • fitment type: Direct Replacement
  • type: Cv Axle
  • performance part: No

offer axlpar:

  • availability: In Stock
  • sold: 0
  • best offers: True
  • options: Ship-to-home
  • quantity: 5
  • started: April 24, 2026

seller axlpar:

  • city: Ontario, California
  • rating: 99.3%
  • # reviews: 5779

shipping axlpar:

  • type: Fixed
  • transit: 4-8 Days
  • carrier: FedEx
  • cost: $0.00
  • class: Economy
  • service: FedEx Ground Economy

general axlpar:

  • condition: New
  • Car Truck Parts Accessories > Transmission Drivetrain > Axle Housings Parts

payments axlpar:

  • credit card: Diners-club
  • other
  • wallet: Apple-pay

returns axlpar:

  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days
for models: s4, s5, a4, a5, for makes: audi, for years: 2010-2011, manufacturer warranty: 1 year, placement on vehicle: front, left, right, fitment type: direct replacement, type: cv axle, performance part: no,
category: auto parts > car truck parts accessories > transmission drivetrain > axle housings parts, sku: 22705280682858751,
Everpartstorecs FP11T2 Is Similar To:

Copyright © axlpar.com