FORD TRUCK 435-01558 Rear Axle Ring Gear Aerostar 8.8

( Brand: Ford Truck ), ( Model: AEROSTAR ), ( Part Type: Ring Axle Gear ), ( Conditions Options: 3.27 ), ( Genuine Oem: Yes ), ( Ipn: 435-01558 ), ( Year: 1994 ), ( Manufacturer Warranty: 90 Day )

Review FORD TRUCK Rear Axle 8.8 Inch Ring Gear Aerostar fits 1990–1997

The Ford 435-01558 rear axle 8.8 ring gear is a crucial component designed for Ford Aerostar vehicles manufactured between 1990 and 1997. This ring gear is an essential part of the differential assembly, responsible for transmitting power from the engine to the axle shafts.

The ring gear is a large, strong ring-shaped component with 29 splines that engage with the drivetrain's pinion shaft. It is made of high-strength steel to ensure durability and resistance to wear and tear. The gear teeth are precision-machined to ensure a positive and efficient power transfer between the pinion shaft and the ring gear.

This ring gear measures approximately 10.1 inches in diameter and 13.2 inches in width, with a pitch diameter of 9.7 inches. It is designed to fit Ford Aerostar models with the 8.8-inch rear axle. The ring gear features a tooth form and tooth profile that match the specifications of the original equipment manufacturer (OEM) to ensure optimal performance and compatibility.

The ring gear is also designed to be robust and durable, with a hardened surface finish to resist wear and corrosion. It is also heat-treated to increase its strength and ability to handle the high temperatures generated during operation. The gear teeth are also inspected for precision and accuracy to ensure smooth operation and quiet performance.

Installing the Ford 435-01558 rear axle 8.8 ring gear is a straightforward process, but it is recommended to have the work done by a professional mechanic or follow the instructions provided in the vehicle's service manual carefully. Proper installation ensures that the ring gear functions correctly, maximizing the lifespan of the differential assembly and the overall performance of the vehicle.

In summary, the Ford 435-01558 rear axle 8.8 ring gear is a critical component for Ford Aerostar vehicles manufactured between 1990 and 1997. It is designed to be durable, efficient, and to provide a positive power transfer between the engine and the axle shafts. With its precision-machined teeth, hardened surface finish, and heat treatment, this ring gear is an excellent choice for those looking to maintain or restore their Aerostar's performance and reliability.

Ford 435-01558 Rear Axle 8.8 Ring Gear (1990-1997 Aerostar): A Comprehensive Analysis

The Ford 435-01558 rear axle 8.8 ring gear is a crucial component of the Ford Aerostar's drivetrain, responsible for transmitting power from the differential to the wheels. Replacing a worn-out ring gear can improve vehicle performance and prevent potential drivetrain damage. In this analysis, we will discuss the pros and cons of purchasing this specific part.

1. Improved Vehicle Performance: A new ring gear ensures optimal torque transfer between the differential and the wheels, resulting in enhanced vehicle performance and responsiveness.

2. Enhanced Drivetrain Durability: A worn-out ring gear can lead to drivetrain damage. Replacing it with a new one can help prevent further issues and extend the life of the drivetrain components.

3. Smoother Driving Experience: A worn-out ring gear can cause vibrations and noise during operation. A new ring gear will result in a smoother driving experience.

4. Availability: The Ford 435-01558 rear axle 8.8 ring gear is readily available from various automotive parts suppliers, both online and offline.

5. Competitive Pricing: The cost of the Ford 435-01558 rear axle 8.8 ring gear is competitive, making it an affordable solution for Ford Aerostar owners seeking to maintain their vehicles.

1. Installation Complexity: Installing a new ring gear requires specialized tools and technical expertise, which may necessitate the assistance of a professional mechanic or the investment in additional tools.

2. Potential for Additional Costs: Depending on the level of labor costs in your area and the availability of the necessary tools, the cost of installation may add to the overall expense of purchasing a new ring gear.

3. Time Consumption: The process of removing the old ring gear and installing a new one can be time-consuming, potentially requiring multiple hours of labor.

The Ford 435-01558 rear axle 8.8 ring gear plays a vital role in the proper functioning of the Ford Aerostar's drivetrain. While its installation may require specialized tools and professional assistance, the benefits of improved vehicle performance, enhanced durability, and a smoother driving experience make it a worthwhile investment for Ford Aerostar owners.

If you own a Ford Aerostar and suspect that your vehicle's drivetrain may be experiencing issues related to a worn-out ring gear, consider consulting a professional mechanic to assess the situation and discuss the potential benefits of a replacement. By investing in a new Ford 435-01558 rear axle 8.8 ring gear, you can not only improve your driving experience but also prevent potential drivetrain damage and extend the life of your vehicle.

Details:

Flush or replace transmission cooler and lines. All the above installation should be in accordance with manufacturer guidelines including proper quantity and fill levels of fluids any technical service bulletins updates. Manual transmissions follow the same procedure as above if applicable. Warranty is valid to original purchaser only.

Clear all computer fault codes. Warranty is not transferable. Engine warranty is contingent upon installation of new intake manifold gaskets. Fitment: AEROSTAR 90 Ford manufactured, 8.8 ring gear, 91-97 gear.

B Failure caused by towing a trailer unless your vehicle is rated the manufacturer for. Failure caused by or related to collisions, theft, vandalism any act of God. The words un examined or unchecked on the delivery note/docket are not acceptable. HASSLE-FREE: 12 MONTHS WARRANTY.

This part may have accessories that are attached and must be removed or switched for proper installation. Warranty covers slippage, shifting failures and/or bearing noise. 100% TESTED PARTS.

Transmissions: Replace the following with new parts: front pump and output shaft seals, pan gaskets filter. Engine installations follow the procedures: Replace following parts if applicable: timing belt, water pump, thermostat, spark plugs, fluids, oil pan gasket, and filter. Adjust shiftier and kick down cables linkage if applicable. AEROSTAR 1994.

Shearing or breaking of teeth in a standard transmission is not warranted under any circumstances.

part #: 435-01558 prices

• $556.50-$760.80

specifications axlpar:

• for makes: Ford
• for years: 1990-1997
• brand: Ford Truck
• model: Aerostar
• part type: Ring Axle Gear
• conditions options: 3.27
• genuine oem: Yes
• ipn: 435-01558
• year: 1994
• manufacturer warranty: 90 Day

offer axlpar:

• sold: 0
• started: February 10, 2025
• options: Ship-to-home
• quantity: 1
• availability: In Stock
• best offers: True

general axlpar:

• condition: Used
• Car Truck Parts Accessories > Transmission Drivetrain > Axle Housings Parts

shipping axlpar:

• service: Flat Rate Freight
• class: Freight
• type: Fixed
• cost: $0.00

seller axlpar:

• rating: 93.8%
• city: Bloomfield, Iowa
• # reviews: 18220

returns axlpar:

• policy: Returns Accepted
• paid by: Seller
• time: 60 Days

payments axlpar:

• credit card: Discover
• other
• wallet: Google-pay

Ford Truck 1636681 Is Similar To:

• 01 02 Ford Explorer Rear (21.8% similar) If you choose to pick the item up it starts on day that. The flat rate shipping charge only applies to continental us. Residential services are available, but it is very expensive. AT,4 Dr, sport TRAC,3. Local pick-up is also available. If there was damage make notes on the paperwork and immediately...(June 23rd, 2017)
• 032ds85009-2206 Spicer Ford Explorer Front And Rear Driveshafts Make Offer (27.8% similar) Make an offer, you never know. This front is considered 22. Purchased both new for over will sell together or individually. Pair of brand new driveshafts that will fit a Ford explorer. They're not doing me any good taking up space in the garage. 25-INCHES long, and is a brand new spicier unit. I did...(June 17th, 2018)
• 10126 Alloy Usa Outer Axle Shaft Dana Ford Trucks 804314180980 (20.1% similar) I recently ordered this shaft for my jeep which runs a Dana 44 from full size F150. It uses Chevy outer knuckles though and therefore I need the shaft not this one. Because I installed the universal joint before realized my mistake can not return it...(May 1st, 2018)
• 1041 D Super Bell Axle Co Bare Ford Drilled Drop Beam (30.8% similar) 25 king pin centers 46. Drop I beam axle mfr. Pros: easy to set up rugged construction yes, I recommend this product. Axles are bare, 46 inches measured at the kingpin centers. Gov specs sold in quantity each finish natural material type cast iron spindle Ford mfg. Perch centers 34. Any visual ...(November 19th, 2018)
• 10652 Rugged Ridge Front Axle Outer Ford For Dana (30.2% similar) New - opened box. Feel free to make reasonable offer...(November 12th, 2018)
• 1111111111111111 Raptor Ford Axle (16.4% similar) Low mileage 2014 Ford raptor rear axle...(September 30th, 2018)
• 12185 Alloy Usa Axle Set Rear Ford Mustang Spline Pair (33.6% similar) Priced to sell, these are new old stock...(October 31st, 2018)
• 14247 Skf Axle Shaft Seal Fits Ford 085311014045 (36.8% similar) ...(February 9th, 2019)
• 15155 Alloy Usa Axle Rear Right Steel Ford Mustang Each (39.4% similar) Buyer pays return shipping. Axle material 1541H alloy steel type c-clip bearings included no inner splines 31 quantity sold individually. Fitment information may not be available for all products and those without will have a compatibility link...(May 31st, 2019)
• 16192 Rare Parts Ford Axle Bumper Rear For Mustang Piece (33.1% similar) This item has been designed and engineered with the latest in cad programs computer equipment. Safety, steering control, and all around smooth ride are the priorities when designing this replacement part. You can rely on rare parts products to keep your vehicle riding safely and comfortably. They ...(November 2nd, 2018)