1. Axle Parts Transmission Drivetrain For Sale
  2. sku: 20423332767970741
  3. VAULTPRO 13541460

VAULTPRO 13541460 Front Right Cv Axle Im NCV19000K L4 1.8L

fits model: Corolla. make: Scion, Toyota. year: 2017–2018.

13541460 Vaultpro Front Right Cv Axle Fits Scion Im 2016 Toyota For Corolla 2017-2018 L4 1.8l

( Brand: Vaultpro ), ( Manufacturer Part Number: 13541460 ), ( Manufacturer Warranty: 1 Year ), ( Type: Cv Axle Shaft ), ( Fitment Type: Direct Replacement ), ( Universal Fitment: No ), ( Ipn: Ncv19000k ), ( Placement On Vehicle: Front, Right ), ( Mounting Style: Bolt-on )

Review VAULTPRO Front Right Cv Axle Scion Im 2016 Toyota L4 1.8l fits COROLLA 2017–2018

Introducing the VaultPro Front Right CV Axle assembly for select 2016-2018 Scion IM and 2017-2018 Toyota Corolla L4 models with a 1.8L 1.8L 4-cylinder engine and front-wheel drive system. This OEM-quality CV axle is manufactured to the same exacting specifications as the original equipment, ensuring a perfect fit and reliable performance.

The VaultPro Front Right CV Axle is designed to connect the drive shaft to the wheel hub, facilitating the transfer of engine power to the wheels. The CV (Constant Velocity) joints in the axle provide a smooth, continuous connection between these two components, minimizing power loss and maximizing driving efficiency.

This axle assembly is made from high-strength materials, including durable steel and reinforced rubber CV boots. The boots protect the CV joints from environmental contaminants, such as water, dirt, and grime, while also maintaining the necessary lubrication for smooth operation.

Installation of the VaultPro Front Right CV Axle is straightforward, requiring no special tools or extensive mechanical knowledge. Simply remove the old axle, install the new one, and reconnect the driveshaft and wheel hub.

By choosing the VaultPro Front Right CV Axle for your Scion IM or Toyota Corolla, you're not only ensuring a precise fit and reliable performance but also investing in the longevity of your vehicle's drivetrain system. Replace your worn-out axle with a new, OEM-quality part from VaultPro, and enjoy the peace of mind that comes with knowing your vehicle is operating at its best.

In summary, the VaultPro Front Right CV Axle for select 2016-2018 Scion IM and 2017-2018 Toyota Corolla L4 models is a high-quality, OEM-specification replacement part designed to restore the drivetrain system's performance and reliability. Made from durable materials and easy to install, this axle assembly is the ideal solution for maintaining the optimal operation of your vehicle.

The VaultPRO 13541460 front right CV axle is a replacement part designed for Scion IM vehicles, including certain models of the 2017-2018 Toyota Corolla L4 1.8L. Like any automotive part, there are pros and cons to consider before making a purchase.

Pros:

1. OEM Quality: The VaultPRO axle is an original equipment manufacturer (OEM) replacement part. This means it is designed to meet the same specifications as the original part, ensuring proper fit and function.

2. Durability: OEM parts are typically built to last as long as the original part. This can save you money in the long run by reducing the need for frequent replacements.

3. Warranty: VaultPRO offers a warranty on their axles, providing peace of mind and protection against manufacturing defects.

4. Availability: OEM parts are generally widely available at dealerships and through automotive parts retailers.

Cons:

1. Cost: OEM parts can be more expensive than aftermarket alternatives. However, the longevity and peace of mind they offer can make the investment worthwhile.

2. Installation: Installing an OEM part may require specialized tools or knowledge, which could add to the overall cost and time of the repair.

3. Limited Performance Upgrades: OEM parts do not typically offer any performance upgrades or enhancements.

Ending Conclusion:

When deciding whether to purchase the VaultPRO 13541460 front right CV axle for your Scion IM or Toyota Corolla, consider the benefits of OEM quality, durability, and warranty, as well as the potential costs and installation requirements. Ultimately, the decision comes down to your personal priorities and budget.

Recommendation:

If you prioritize proper fit, function, and peace of mind, as well as the potential for long-term savings, an OEM replacement part like the VaultPRO 13541460 front right CV axle is a solid choice. However, if you're on a tight budget and are willing to accept the potential for slightly shorter part life, an aftermarket alternative may be a more cost-effective option.

Details:

Install the new axle: splinted end of CV axle with transmission output shaft, push it steadily until cir clip fully locks into place a clear sound is heard. Vehicle Preparation: Park the vehicle on a level surface, engage parking brake and secure wheels, lift to safe height recommended: over 30cm above ground, remove wheel side be replaced. Abnormal Condition Handling: If vibration, abnormal noise especially during cornering, or oil leakage occurs while driving, stop the vehicle immediately for inspection to prevent damage transmission suspension system. Reassembly and Inspection: Reconnect the lower control arm ball joint tighten lock nut.

Ensure the flange surface fits closely with steering knuckle, and tighten fixing bolts to specified torque reference value: 80-120N m; refer vehicles service manual for exact specifications. Pre-Installation Preparation. CV Axle Installation Instructions. Resume normal driving after the components are fully broken-in.

Choose a vehicle from the My Garage list. Apply a small amount of lithium-based grease follow the manufacturers instructions for whether to apply it transmission end. Scion iM 2016 L4 1.8L Front Right, Toyota Corolla 2017 2018 Right. Installation Steps.

Usage Precautions. Remove the old axle: Disconnect fixing bolts between half-shaft and transmission, separate steering knuckle from lower control arm ball joint using a separator, gently tap flange end of to remove axle avoid impacting transmission output shaft. Check for no shaft bending, intact and leak-free boot, undamaged constant velocity joint raceways, normal cir clip elasticity. Tool Compatibility: Prepare a torque wrench recommended range: 50-200N m, ball joint separator, cir clip pliers, socket set, and rubber mallet.

Ensure the tool specifications match vehicles bolts. Cleaning and Pre-treatment: Clean the splines of transmission output shaft contact surface steering knuckle bearing housing to remove oil, grease, rust.

part #: 13541460 price

  • $89.49

specifications axlpar:

  • for models: Corolla
  • for makes: Scion, Toyota
  • for years: 2017-2018
  • brand: Vaultpro
  • mpn: 13541460
  • manufacturer warranty: 1 Year
  • type: Cv Axle Shaft
  • fitment type: Direct Replacement
  • universal fitment: No
  • ipn: Ncv19000k
  • placement on vehicle: Front, Right
  • mounting style: Bolt-on

shipping axlpar:

  • class: Standard
  • service: Standard
  • transit: 3-8 Days
  • type: Fixed
  • cost: $0.00

seller axlpar:

  • # reviews: 3
  • city: Ontario, California
  • rating: 100.0%

payments axlpar:

  • other
  • credit card: Discover
  • wallet: Apple-pay

offer axlpar:

  • options: Ship-to-home
  • started: January 7, 2026
  • sold: 0
  • quantity: 1
  • availability: In Stock
  • best offers: True

returns axlpar:

  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days

general axlpar:

  • condition: New
  • Car Truck Parts Accessories > Transmission Drivetrain > Axle Housings Parts
for models: corolla, for makes: scion, toyota, for years: 2017-2018, manufacturer warranty: 1 year, type: cv axle shaft, fitment type: direct replacement, universal fitment: no, placement on vehicle: front, right, mounting style: bolt-on,
category: auto parts > car truck parts accessories > transmission drivetrain > axle housings parts, sku: 20423332767970741,
Vaultpro 13541460 Is Similar To:
axlpar logo
1 offer $89.49 USD
  • New. Offer #1 priced at $89.49 + $0.00 shipping estimate = $89.49* total. Ensure the flange surface fits closely with the steering knuckle, and tighten the fixing bolts to the specified torque (reference value: 80-120N m; refer to the vehicle's service manual for exact specifications). Scion iM 2016 L4 1.8L Front Right.FREE SHIPPING

Copyright © axlpar.com