VAULTPRO 13487223 Front Right Cv Axle Venza L4 V6 2.7L 3.5L
fits model: Rx350, Highlander. make: Toyota, Lexus.
( Brand: Vaultpro ), ( Manufacturer Part Number: 13487223 ), ( Part Type: Cv Axle ), ( Manufacturer Warranty: 1 Year ), ( Fitment Type: Direct Replacement ), ( Surface Finish: Painted ), ( Non-domestic Product: No ), ( Weight: 25lb ), ( Material: Steel ), ( Input Shaft Connection Style: Spline ), ( Number Of Inboard Splines: 24 ), ( Output Shaft Spline Count: 30 ), ( Drive Type: Fwd ), ( Axle Nut Locking Type: Stake ), ( Spindle Nut Included: Yes )
Review VAULTPRO Front Right Cv Axle Toyota Venza Lexus L4 V6 2.7l 3.5l fits HIGHLANDER RX350
Ensure the tool specifications match vehicles bolts. Abnormal Condition Handling: If vibration, abnormal noise especially during cornering, or oil leakage occurs while driving, stop the vehicle immediately for inspection to prevent damage transmission suspension system. Pre-Installation Preparation. Resume normal driving after the components are fully broken-in.
Check for no shaft bending, intact and leak-free boot, undamaged constant velocity joint raceways, normal cir clip elasticity. Remove the old axle: Disconnect fixing bolts between half-shaft and transmission, separate steering knuckle from lower control arm ball joint using a separator, gently tap flange end of to remove axle avoid impacting transmission output shaft. Ensure the flange surface fits closely with steering knuckle, and tighten fixing bolts to specified torque reference value: 80-120N m; refer vehicles service manual for exact specifications. Reassembly and Inspection: Reconnect the lower control arm ball joint tighten lock nut.
Apply a small amount of lithium-based grease follow the manufacturers instructions for whether to apply it transmission end. Tool Compatibility: Prepare a torque wrench recommended range: 50-200N m, ball joint separator, cir clip pliers, socket set, and rubber mallet. Vehicle Preparation: Park the vehicle on a level surface, engage parking brake and secure wheels, lift to safe height recommended: over 30cm above ground, remove wheel side be replaced. Install the new axle: splinted end of CV axle with transmission output shaft, push it steadily until cir clip fully locks into place a clear sound is heard.
Installation Steps. Fitment: Lexus RX350 2010 -2015, Toyota Highlander 2008 -2018, Venza 2009 -2016, CV Axle Installation Instructions. Usage Precautions. Choose a vehicle from the My Garage list.
Cleaning and Pre-treatment: Clean the splines of transmission output shaft contact surface steering knuckle bearing housing to remove oil, grease, rust.
part #: 13487223 price
- $85.69
specifications axlpar:
- for models: Rx350, Highlander
- for makes: Toyota, Lexus
- brand: Vaultpro
- mpn: 13487223
- part type: Cv Axle
- manufacturer warranty: 1 Year
- fitment type: Direct Replacement
- surface finish: Painted
- non-domestic product: No
- weight: 25lb
- material: Steel
- input shaft connection style: Spline
- number of inboard splines: 24
- output shaft spline count: 30
- drive type: Fwd
- axle nut locking type: Stake
- spindle nut included: Yes
seller axlpar:
- city: Ontario, California
- rating: 99.5%
- # reviews: 1172
payments axlpar:
- other
- wallet: Google-pay
- credit card: Discover
general axlpar:
- Car Truck Parts Accessories > Transmission Drivetrain > Axle Housings Parts
- condition: New
returns axlpar:
- time: 30 Days
- paid by: Seller
- policy: Returns Accepted
offer axlpar:
- started: June 4, 2026
- best offers: True
- availability: In Stock
- sold: 0
- options: Ship-to-home
- quantity: 1
shipping axlpar:
- transit: 4-8 Days
- class: Standard
- cost: $0.00
- type: Fixed
- service: Standard
Vaultpro 13487223 Is Similar To:
- Vaultpro 13487215 Front Left Cv Axle Fits Ford Transit Connect 2014 2015 2016 2017 2018 (56.4% similar) Check for no shaft bending, intact and leak-free boot, undamaged constant velocity joint raceways, normal cir clip elasticity. Installation steps. Fitment: ford transit connect 2014 -2018, cv axle installation instructions. Resume normal driving after the components are fully broken-in. Tool ...(December 10th, 2025)
- Vaultpro 13501148 Front Left Cv Axle Fits Hyundai Sonata Kia Optima 2015-2020 L4 2.4l (60.3% similar) Cleaning and pre-treatment: clean the splines of transmission output shaft contact surface steering knuckle bearing housing to remove oil, grease, rust. Remove the old axle: disconnect fixing bolts between half-shaft and transmission, separate steering knuckle from lower control arm ball joint using...(December 17th, 2025)
- Vaultpro 13506347 Front Left Or Right Cv Axle Fits Chevrolet Malibu Pontiac G6 2004-2010 2.4l (54.5% similar) Usage precautions. Install the wheel tighten bolts evenly in a diagonal pattern, torque reference: 90-110N m and lower vehicle. Reassembly and inspection: reconnect the lower control arm ball joint tighten lock nut. Vehicle preparation: park the vehicle on a level surface, engage parking brake and ...(December 18th, 2025)
- Vaultpro 13510200 Front Left Cv Axle Fits Nissan Altima 2004-2006 V6 3.5l Automatic Transmission (51.6% similar) Apply a small amount of lithium-based grease follow the manufacturers instructions for whether to apply it transmission end. Ensure the tool specifications match vehicles bolts. Remove the old axle: disconnect fixing bolts between half-shaft and transmission, separate steering knuckle from lower ...(December 19th, 2025)
- Vaultpro 13511957 Front 2 Brake Discs Rotors Cv Axle Fits Gmc Yukon Xl 1500 2007-2015 (45.8% similar) Abnormal condition handling: if vibration, abnormal noise especially during cornering, or oil leakage occurs while driving, stop the vehicle immediately for inspection to prevent damage transmission suspension system. Installation steps. Usage precautions. Vehicle preparation: park the vehicle on a ...(December 20th, 2025)
- Vaultpro 13514475 2pcs Front Cv Axles Fits Nissan Murano 2009-2014 V6 3.5l Fwd Left Right (54.6% similar) Reassembly and inspection: reconnect the lower control arm ball joint tighten lock nut. Usage precautions. Part type cv axle assembly,cv shaft. Fitment: Nissan Mariano 2009 -2014, cv axle installation instructions. Installation steps. Vehicle preparation: park the vehicle on a level surface, engage...(December 22nd, 2025)
- Vaultpro 13514465 2pcs Front Cv Axles Fits Honda Civic Ex Ex-l Lx Sport Touring L4 1.5l (51.9% similar) Vehicle preparation: park the vehicle on a level surface, engage parking brake and secure wheels, lift to safe height recommended: over 30CM above ground, remove wheel side be replaced. Apply a small amount of lithium-based grease follow the manufacturers instructions for whether to apply it ...(December 22nd, 2025)
- Vaultpro 13522470 Front Right Cv Axle Fits Cadillac Srx 2004-2009 Sts 2005-2010 4.6l Cts 2014 2.0l (58.3% similar) Resume normal driving after the components are fully broken-in. Remove the old axle: disconnect fixing bolts between half-shaft and transmission, separate steering knuckle from lower control arm ball joint using a separator, gently tap flange end of to remove axle avoid impacting transmission output...(December 25th, 2025)
- Vaultpro 13514494 Front Cv Axles Brake Pads And Rotors Fits Toyota 4runner Sr5 4.0l 2003-2009 (54.5% similar) Check for no shaft bending, intact and leak-free boot, undamaged constant velocity joint raceways, normal cir clip elasticity. Apply a small amount of lithium-based grease follow the manufacturers instructions for whether to apply it transmission end. Ensure the flange surface fits closely with ...(January 4th, 2026)
- Vaultpro 13484224 Front Left Or Right Cv Axle Fits Toyota Tundra Sequoia 4.7l 2005-2006 4wd (65.9% similar) Installation steps. Ensure the tool specifications match vehicles bolts. Cleaning and pre-treatment: clean the splines of transmission output shaft contact surface steering knuckle bearing housing to remove oil, grease, rust. Tool compatibility: prepare a torque wrench recommended range: 50-200N m, ...(January 7th, 2026)
