1. Axle Parts Transmission Drivetrain For Sale
  2. sku: 21560840407617751
  3. EVERPARTSTORECS 13454506

EVERPARTSTORECS 13454506 Front Driver Cv Axle 66-5408 1.5L

fits model: Prius. make: Toyota. year: 2012–2019.

13454506 Everpartstorecs Front Driver Side Cv Axle Assembly For 2012-2019 Toyota Prius C 1.5l

( Brand: Everpartstorecs ), ( Manufacturer Part Number: 13454506 ), ( Part Type: Cv Driver Axle ), ( Manufacturer Warranty: 1 Year ), ( Placement On Vehicle: Front, Left ), ( Fitment Type: Direct Replacement ), ( Location: Front Left Front Driver Side ), ( Engine: L4 1.5l ), ( Ipn: 66-5408 ), ( Compressed Length: 24.764 In ), ( Note: Supplied With Standard Neoprene Outboard Boot ), ( Output Shaft Spline Count: 26 )

Review EVERPARTSTORECS Front Driver Side Cv Axle Assembly Toyota 1.5l fits PRIUS 2012–2019

EverStart Replacement Front Driver CV Axle Assembly for 2012-2019 Toyota Prius 1.5L

Description:

The EverStart Front Driver CV Axle (Part Number: 13454506) is a precision-engineered component designed specifically for the front-wheel drive system of the 2012-2019 Toyota Prius 1.5L. This axle is an essential part of the vehicle's powertrain, responsible for transferring engine power to the wheels, ensuring optimal vehicle performance and handling.

Made with high-quality materials, this EverStart CV Axle is built to last. It features a durable, heat-treated steel construction to withstand the demands of daily driving. The CV joints are sealed to prevent the intrusion of contaminants, ensuring a long service life and minimal maintenance requirements.

This axle is a direct replacement for the original equipment, ensuring a perfect fit and function. It also comes with all necessary hardware for a hassle-free installation. The EverStart Front Driver CV Axle is designed to meet or exceed OEM specifications, ensuring the same level of reliability and performance as the original component.

By choosing the EverStart Front Driver CV Axle for your Toyota Prius, you can enjoy the peace of mind that comes with knowing you have a high-quality, dependable replacement part. This axle is the perfect solution for vehicles with worn or damaged CV axles, helping to restore the vehicle to its original performance and handling capabilities.

In conclusion, the EverStart Front Driver CV Axle (Part Number: 13454506) is a premium replacement component for the front-wheel drive system of the 2012-2019 Toyota Prius 1.5L. It is built with high-quality materials, designed to meet or exceed OEM specifications, and features a durable, heat-treated steel construction to ensure optimal performance and handling. With this axle, you can restore your vehicle to its original condition and enjoy the peace of mind that comes with a dependable and long-lasting replacement part.

The EverStart CS 13454506 front driver CV axle is a replacement part for the CV axle assembly in the front driver side of select Toyota Prius models from 2012 to 2019 with a 1.5L engine. Here are the potential pros and cons of purchasing this part:

Pros:

1. OEM Equivalent: This EverStart CS part is an OEM (Original Equipment Manufacturer) equivalent, meaning it is designed to meet the same specifications as the original part from the vehicle manufacturer.

2. Cost-effective: Compared to purchasing a new part directly from a dealership, buying from an aftermarket supplier like EverStart can save you money.

3. Availability: Aftermarket parts like this one are often more readily available than OEM parts from a dealership.

4. Easy installation: This is a CV axle assembly, meaning it is a complete unit that includes the CV joints, boots, and other necessary components. This can make the installation process easier and less time-consuming for the average DIYer.

Cons:

1. Quality concerns: Aftermarket parts can sometimes have quality issues, such as inferior materials or poor manufacturing processes. While EverStart is a reputable brand, there is still a chance that the part may not last as long as an OEM part.

2. Fitment issues: Although this part is listed as being compatible with the specified Toyota Prius models, there is always a small chance that it may not fit perfectly. It's important to ensure that the part is installed correctly to minimize any potential issues.

3. Shipping time: When purchasing from an aftermarket supplier, there may be a delay in receiving the part due to shipping times.

Ending Conclusion:

The EverStart CS 13454506 front driver CV axle appears to be a cost-effective and readily available solution for those in need of a replacement part for their Toyota Prius. However, there are potential risks associated with aftermarket parts, such as quality concerns and fitment issues. Ultimately, the decision to purchase this part depends on your individual needs, budget, and comfort level with aftermarket parts.

Recommendation:

If you are comfortable with the potential risks associated with aftermarket parts and are looking to save money compared to purchasing from a dealership, then the EverStart CS 13454506 front driver CV axle may be a suitable option for you. However, if you prefer the peace of mind that comes with OEM parts or have concerns about the fitment or quality of aftermarket parts, it may be worth considering purchasing from a dealership instead.

Details:

Outer End: Slide the outer CV joint splines through wheel hub. Lower the vehicle completely and perform a final torque on lug nuts in star pattern. CV Boots: These are flexible rubber or thermoplastic boots that enclose each joint. Park the vehicle on a level, solid surface and engage parking brake.

Durability: CV axles are engineered to withstand high levels of torque, shock loads, and extreme operating angles. The inner end of the CV axle splines into transmissions differential. Brake caliper and rotor hang the safely with a wire, do not let it dangle by brake hose. A torn CV boot is a common failure point that leads to joint wear.

Outer CV Joint: This joint connects to the wheel hub/knuckle. Safely lift the vehicle and support it with jack stands. Never work under a vehicle supported only by jack. It is typically a Resp Ball-type joint, famous for its ability to operate at high angles.

Compare the new CV axle with old one to ensure they are identical. In AWD vehicles, all four wheels have CV axles connecting the front/rear differentials. Reconnect the steering knuckle to ball joint and control arm. Be cautious not to damage the transmission seal or housing.

Disconnect Components: any components that obstruct the axles removal. Front Driver Side CV Axle Assembly For 2012 2019 Toyota Prius C 1.5L Fitment. Install the wheel but do not fully tighten lug nuts yet. ABS ring, cir clips from the old axle to new one if they are not pre-installed.

Place a drain pan underneath, as some transmission fluid may leak out. Remove the Axle Nut: Completely remove pre-loosened axle nut. Reconnect the tie rod end. Constant Velocity CV Joints: Each axle has two types of CV joints: Inner Joint: This joint connects to the transmission or differential.

CV Axle Installation Location. CV Axle Features. Reinstall the brake rotor and caliper. Step 1:Safety Preparation.

Inner End: Gently push the inner CV joints splines into transmission until its and is fully seated. It is designed primarily to accommodate the in-and-out plunging motion as suspension moves up and down. The boots are crucial because they keep contaminants dirt, water out and grease in. Loosen the large axle nut hub nut on wheel while vehicle is still ground.

Before lowering the vehicle, install new axle nut always use a if specified by manufacturer. Step 2:Disconnection. Installation steps for CV A xle. You might need a pry bar to gently persuade it.

A new transmission seal is often recommended at this time. They are packed with special high-temperature grease to lubricate the joint. This typically includes. Check the transmission fluid level and top it up if necessary, as some is always lost during removal.

The outer end splines into the wheel hub or steering knuckle and is secured by a large nut. For Toyota Prius C 2012 2019 L4 1.5L Front Left. Important: Do not over-angle the new axle, as this can damage CV boots. Test drive the vehicle carefully, listening for any unusual noises, and check proper operation.

Axle Shaft: A sturdy steel shaft that connects the inner and outer CV joints. Carefully transfer any necessary components Tie rod end from the steering knuckle. Lower ball joint or control arm from the steering knuckle.

Remove the wheel. It is designed to handle the extreme angles required for steering wheels left and right. This creates enough space to pop the CV axle out of wheel hub and transmission. This is critical for proper bearing reload.

The CV axle is located at each driven wheel. Outer End: Pull the steering knuckle back to slide outer CV joint splines out of wheel hub. Use a ball joint separator tool to safely free the steering knuckle from control arm or strut. Inner End: Carefully pry the inner CV joint out of transmission using a bar.

No delivery to remote areas. Once separated, you can pull the entire steering knuckle assembly outward.

part #: 13454506 price

  • $60.28

specifications axlpar:

  • for models: Prius
  • for makes: Toyota
  • for years: 2012-2019
  • brand: Everpartstorecs
  • mpn: 13454506
  • part type: Cv Driver Axle
  • manufacturer warranty: 1 Year
  • placement on vehicle: Front, Left
  • fitment type: Direct Replacement
  • location: Front Left Front Driver Side
  • engine: L4 1.5l
  • ipn: 66-5408
  • compressed length: 24.764 In
  • note: Supplied With Standard Neoprene Outboard Boot
  • output shaft spline count: 26

offer axlpar:

  • availability: In Stock
  • quantity: 5
  • sold: 0
  • started: February 28, 2026
  • options: Ship-to-home
  • best offers: True

seller axlpar:

  • rating: 99.0%
  • # reviews: 4101
  • city: Ontario, California

general axlpar:

  • condition: New
  • Car Truck Parts Accessories > Transmission Drivetrain > Axle Housings Parts

payments axlpar:

  • wallet: Google-pay
  • other
  • credit card: Visa

shipping axlpar:

  • type: Fixed
  • transit: 5-9 Days
  • service: FedEx Ground Economy
  • cost: $0.00
  • carrier: FedEx
  • class: Economy

returns axlpar:

  • policy: Returns Accepted
  • paid by: Seller
  • time: 30 Days
for models: prius, for makes: toyota, for years: 2012-2019, part type: cv driver axle, manufacturer warranty: 1 year, placement on vehicle: front, left, fitment type: direct replacement, location: front left front driver side, engine: l4 1.5l, compressed length: 24.764 in, note: supplied with standard neoprene outboard boot, output shaft spline count: 26,
category: auto parts > car truck parts accessories > transmission drivetrain > axle housings parts, sku: 21560840407617751,
Everpartstorecs 13454506 Is Similar To:
axlpar logo
1 offer $60.28 USD
  • New. Offer #1 priced at $60.28 + $0.00 shipping estimate = $60.28* total. . Fitment For Toyota Prius C 2012-2019 L4 1.5L Front Left CV Axle Features?? 1.FREE SHIPPING

Copyright © axlpar.com